US Tank Destroyer Regeln

      US Tank Destroyer Regeln

      Ich habe gestern ein bischen im Regelbuch gelesen, u. da ist mir eingefallen, dass ich unlängst mit Turin u. dem Codex Marine über die V3 Tank Destroyer Regel gespochen habe.

      In den Regeln steht tatsächlich drinnen, dass man die Tank Destroyer Gruppe in command mit einem beliebigen Team aufstellen muss, aber nicht dass die Security Section dabei in command sein muss.

      D.h. man könnte wirklich ein Team auf der einen Seite zurück lassen, u. die restliche Section auf die andere Seite des Tisches fahren, u. so mehr oder weniger den ganzen Tisch abdecken. 0_o

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von „Grim“ ()

      RE: US Tank Destroyer Regeln

      Das ging schon in V2 :P Solang der Commander zumindest die Hälfte der Teams mitnimmt kann er ja welche zurücklassen ;)
      Allerdings is mir im letzten Spiel aufgefallen, dass die Tank Destroyer Section nicht mehr disengagen darf, wenn sie gefeuert hat - hat mir dann das Platoon gekostet, obwohl die Fluchtroute schon perfekt geplant war... ;(
      Ich bin dumm und kann nicht würfeln (M.M. 2005)

      TEAM ZETTLING
      TEAM STEIERMARK
      TEAM AUSTRIA
      @Invader

      Wo gehört der dazu? Ich habs jetzt nicht komplett im Kopf.

      Was ich mich erinnere steht nur, dass die Tankdestroyer Section in command zu einem Team der Securitysection aufgestellt werden muss.

      Gibts noch wo einen Satz der sagt dass die Security Section in command sein muss bevor sie ausgetauscht wird? Ich denke nicht.

      Ich würde mit der Securitysection ein Auto zurück lassen, mim Rest quer übers Feld fahren, u. meine Tankdestroyer dann entweder komplett in Command mit dem Zurückgelassenen aufstellen, oder mit dem Part der Securitysection die quer übers Feld gefahren ist.
      Sind die Regeln aus dem Regelbuch jetzt eigentlich "legal" und erlaubt oder sollten die Regeln verwendet werden die sie gerade "testen" im englischem Forum?

      hier die "überarbeiteten" TDR von der BF HP:

      The new Tank Destroyers special rules in Version 3 seem to have some loopholes that have allowed players to do things that weren’t intended when we wrote them. After reading hundreds of pages of discussion on the forum (it’s good to know our players are so passionate!), we have come up with a few things that we are considering as possible solutions to the problems. In line with my previous thoughts on the matter, the changes we are suggesting won’t result in a radical change in the way that tank destroyers operate. Hopefully, what they will do is close some of the loopholes that have been creating the frustration and unhappiness that has been clearly expressed on the forum.

      We are looking for feedback on these ideas, so try them out and let us know how they work out for you.

      Reconnaissance

      While the tank destroyer arm uses a lot of the reconnaissance techniques developed by the cavalry, they use them to get into position, rather than to gather information.

      Teams from platoons that use the Tank Destroyer special rules can use the Cautious Movement and Disengage rules as if they were Recce teams, and retain the 3+ save for unarmoured jeep teams if appropriate, but are not Recce teams and cannot use the other Recce team special rules. This applies to both the Security and Tank Destroyer Sections.

      Placing Tank Destroyers after Disengaging

      The security section are well trained at avoiding contact with superior forces as they guide the tank destroyers into position. However, when they disengage, the tank destroyers need to reposition themselves quickly to avoid being exposed.

      If any teams in the Security Section are Reorganising when the Tank Destroyer Section is placed, all teams from Tank Destroyer Section are Reorganising when they are placed, unless they are within within Command Distance of a Security Section team that is not Reorganising and is from the same platoon.

      No Placing Tank Destroyers after Moving At the Double

      The tank destroyers need to move cautiously to get into position undetected. If the security section races off, they need time to catch up and reposition themselves.

      If a team from the Security Section moved At the Double in its previous Movement Step, it does not count as being part of the Security Section when determining where the Tank Destroyer Section can be placed. If the whole Security Section moved At the Double in its previous Movement Step, this prevents the Tank Destroyer Section from being placed this turn.

      Transferring Command

      The tank destroyer arm is trained to operate fluidly and independently. Their excellent communications network allows them to stay informed of the situation and respond to casualties amongst the security section by either redirecting their advance or by bringing the tank destroyers into the line.

      When the Platoon Command team of the Security Section is Destroyed, immediately select another team of the Security Section that is within Command Distance of it as the new Platoon Command team.

      If the Command team of the Security Section is Destroyed and cannot be replaced using the above rule, immediately place the Tank Destroyer Section (using the normal rules as if it was the start of their turn), then remove the Destroyed Command team and the rest of the Security Section. The entire Tank Destroyer Section is now treated as having Disengeged and must Reorganise in its next turn.

      Placing Towed Tank Destroyers

      The towed tank destroyer battalions use the immense (but powerful) M5 3in gun. This weapon is large and difficult to emplace quickly, making it unsuitable for short-range ambushes.

      Immobile Gun teams placed using the Tank Destroyer Section rule may not be placed within 16”/40cm of any enemy team within Line of Sight.

      This brings the towed tank destroyers in line with the Ambush mission special rules where Immobile Gun teams cannot be placed within 16”/40cm of the enemy.

      Some Notes on the Tank Destroyer Rules

      The last thing I’d like to cover isn’t a change at all. Rather, it’s a couple of parts of the existing rules that seem to get overlooked at times.

      Tank Destroyer Section

      Here’s the first part of the Tank Destroyer Sections rule on page 238 of the rulebook.

      Place the Tank Destroyer Section on the table at the start of any of your turns when Ambushes are revealed so that every team in the Tank Destroyer Section is:
      * within Command Distance of a team from the Security Section, and
      * In Command when the Security Section is removed.

      What the first bullet means is that every team in the Tank Destroyer Section must be placed within Command Distance of a team from the Security Section. This means that you cannot string them out with just one team near the Security Section.

      The second bullet requires the whole Tank Destroyer Section to be In Command after the Security Section is removed. This means that you cannot put half of the Tank Destroyer Section at one end of the Security Section and half at the other. The Tank Destroyer Section must be placed as a single platoon entirely In Command.

      Tank Destroyers and Prepared Positions

      There has been some confusion over the interaction between the Prepared Positions mission special rule and tank destroyers. Since the Tank Destroyer Section moved to follow the Security Section’s perambulations (unless the tank destroyers were deployed right at the start of the game), they are not Dug In when they are placed using the Tank Destroyer Section rule.